Home
My other challenge is the 1:24 Mclaren, here is what i've done so far
This is the reference i used
This is the reference i used
+6
bcauchi
Ray
skyhigh
5Nige
el manolo
Robert
10 posters
Mclaren Mercedes mp4-25 Revell
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
el manolo- Bronze
- Posts : 287
Join date : 2012-03-15
Age : 39
robert goodluck with this model. If I were you I would check the exact ratios as revell f1 cars are not ideal for this section.
5Nige- Commended
- Posts : 95
Join date : 2012-12-23
Age : 53
Location : B'Kara
Prosit Robert, nice start. From my experience with the Revell F1 kits they have evidenced a drastic improvement lately. Also the engine usually is enclosed within and cannot be seen given that the engine cowl is usually fixed on these kits. Did you consider to separate the engine from the gearbox and display alongside the model? Also I believe that you will be going the Alclad Chrome road for finish - if you are considering to clearcoat after decal application then the Alcald aqua gloss is the best as this does not diminish the chrome sheen. If you require anything pls do contact me. C U
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
5Nige wrote:Prosit Robert, nice start. From my experience with the Revell F1 kits they have evidenced a drastic improvement lately. Also the engine usually is enclosed within and cannot be seen given that the engine cowl is usually fixed on these kits. Did you consider to separate the engine from the gearbox and display alongside the model? Also I believe that you will be going the Alclad Chrome road for finish - if you are considering to clearcoat after decal application then the Alcald aqua gloss is the best as this does not diminish the chrome sheen. If you require anything pls do contact me. C U
Thanks Alan.
I will leave the engine in and most prob i will leave the cover open still have to decide..yes Alclad will be used too, regard the aqua gloss im not convinced enough about the final result but defiantly will try all options...
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
Time for some carbon fiber
Home made carbon fiber
Home made carbon fiber
el manolo- Bronze
- Posts : 287
Join date : 2012-03-15
Age : 39
good progress.
skyhigh- Best in Show
- Posts : 4654
Join date : 2009-07-30
Age : 63
Location : Qormi, Malta
Wow Robert ...very good work.... 
Ray- Best in Show
- Posts : 6102
Join date : 2009-07-21
Age : 61
Location : Zurrieq MALTA
"Home made carbon fibre" 
What else is there that you won't attempt
Keep it up Rob
What else is there that you won't attempt
Keep it up Rob
bcauchi- Best in Show
- Posts : 4088
Join date : 2009-07-30
Age : 63
Location : St. Julian's
Very interesting, how did you do that, it looks really nice. Did you spray over netting?
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
el manolo- Bronze
- Posts : 287
Join date : 2012-03-15
Age : 39
awesome, what did you use for that chrome?
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
bcauchi wrote:Very interesting, how did you do that, it looks really nice. Did you spray over netting?
yes and stretch it with the desired area
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
el manolo wrote:awesome, what did you use for that chrome?
Alclad
el manolo- Bronze
- Posts : 287
Join date : 2012-03-15
Age : 39
could you use lacquer on it or you leave it just like that?
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
el manolo wrote:could you use lacquer on it or you leave it just like that?
you have to put other wise it will get damaged easily.i took the addvise that Alan gave me and used acqua gloss by alclad too
in nannu pec- Best in Show
- Posts : 2019
Join date : 2009-07-23
Age : 76
Location : Qawra Malta
well done Robert.....very nice buddy
in nannu
in nannu
ferraribert- Highly Commended
- Posts : 127
Join date : 2012-03-20
Age : 47
Location : gharghur
very nice robert...Chrome looks very nice. Proset
5Nige- Commended
- Posts : 95
Join date : 2012-12-23
Age : 53
Location : B'Kara
Nice work with the chrome paint and lacquer Robert.
Ray- Best in Show
- Posts : 6102
Join date : 2009-07-21
Age : 61
Location : Zurrieq MALTA
Robert wrote:el manolo wrote:could you use lacquer on it or you leave it just like that?
you have to put other wise it will get damaged easily.i took the addvise that Alan gave me and used acqua gloss by alclad too
That is True SSM Spirit becuase that is what never saturates, but on the contrary keeps GROWING
Welldone Alan for Providing & Welldone Rob for Absorbing
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
cockpit.removed the molded seat belts and scratch build a new ones.
5Nige- Commended
- Posts : 95
Join date : 2012-12-23
Age : 53
Location : B'Kara
Prosit Robert, very clean work As to the steering wheel this was covered in cf except for the grips, which were grey. Moreover they were made out of leather, hence if you want this effect you may use flocking. If you need will clarify this technique next Wed. Prosit mate, n C U.
As to the steering wheel this was covered in cf except for the grips, which were grey. Moreover they were made out of leather, hence if you want this effect you may use flocking. If you need will clarify this technique next Wed. Prosit mate, n C U.
Robert- Bronze
- Posts : 259
Join date : 2012-06-14
Age : 41
Location : Haz-zebbug
5Nige wrote:Prosit Robert, very clean work
Hi Alan thanks lis steering wheel ghamiltu ekk.skond photos Li Sibt fuq google.xtahseb?
bcauchi- Best in Show
- Posts : 4088
Join date : 2009-07-30
Age : 63
Location : St. Julian's
Prosit all round, this is another of your awesome builds, looking fantastic.
5Nige- Commended
- Posts : 95
Join date : 2012-12-23
Age : 53
Location : B'Kara
Hi Alan thanks lis steering wheel ghamiltu ekk.skond photos Li Sibt fuq google.xtahseb?
[/quote]
That's it mate!
[/quote]That's it mate!
Dottore- Gold
- Posts : 1388
Join date : 2009-07-21
Age : 46
Location : Tarxien, Malta
Lovely paint job Rob. Next time try using lead foil or tamiya masking tape for the seat belts I think the surface texture is better in my opinion. (Unless thats the way they are in reality).
Have to try this Alclad one day. I dont think it ships to Malta eh?
Dottore
Have to try this Alclad one day. I dont think it ships to Malta eh?
Dottore
